Re: [RCSE] Organic 2M - flap servo question

[dave <dave@xxxxxxxxxxxxxxxxxx>]

Hi Ben

I've been flying an Organic for about 2 months now and I've never seen a
2 meter fly like this one, pure brilliance. I think the name should
change to Orgasmic far more appropriate.

As to fitting the flap servo. I came up with a very simple system. 

Fit two balsa cross pieces between the ribs that make up the servo well.
On top of this fit a 1/16 ply strip to grip the screws and fit the servo
as you would to rails in the fuselage.

If you need more help mail me off list and I'll send you a couple of
digital pictures.

Have fun with her.

Dave.


 In message <392201F8.D14B48C7@xxxxxxxxxxx>, Ben Diss <Ben@xxxxxxxxxxx>
writes
>I'm putting together a FVK Organic 2M.  This plane has a three piece wing with 
>one servo for the flaps.  I'm trying to figure out how to mount the servo in 
>the 
>bay in the center of the wing.  It looks like one way would be to glue it to a 
>rib, but because of the angle needed to align the pushrod with the control horn 
>there wouldn't be much area in contact.
>
>Anybody got any ideas?
>
>-Ben
>RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
>"unsubscribe" requests to soaring-request@xxxxxxxxxx

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and "unsubscribe" requests to soaring-request@xxxxxxxxxx